Spidertrax 7075-T6 Sway Bar Arms 14 in. Arm (Pair)

Spidertrax Sway Bar Arms are designed ground-up as the end-all sway bar arm solution. We start with a single piece of domestic grade 7075-T6 aluminum. Out of the gate, they're 64% lighter -AND- 36% stronger than steel. Comparing Spidertrax arms with the 6061-T6 aluminum alternatives, they're 83% stronger.

They manufacture each arm length as a one-piece design. No add-on tabs, no cutting, and no modifications needed. Pick the arm length you need, and that's that. Taking advantage of their custom in-house 4th axis fixturing, they are able to manufacture each arm with minimal setups, ensuring the highest degree of tolerance from feature to feature.

Simplicity in design is bliss, and when it comes time to assemble your Sway Bar Arms and Sway Bar Shaft, you'll see what we mean. No cover bolts, no external plates, and no sloppy spline fitments. Simply tighten the included 1/2" shoulder bolt & flanged nut (the same sized bolt & nut used to assemble the rod end), and you're all set. Your Sway Bar Arms and Sway Bar Shaft will stay solidly in place. Not only the simplest assembly in class but the strongest as well.

Once assembled, you'll notice one of the most unique features if you've run other sway bar arms in the past. Our Sway Bar Arms and shafts are phased with each other. Assemble your arms and shafts, and your Sway Bar Arms will be perfectly parallel. Nothing is more frustrating than spending what feels like a lifetime building the ultimate rig, only to have your sway bar arms indexed from each other when finished. It's wrong, looks cheap, and is entirely unnecessary.

All Spidertrax 7075-T6 Sway Bar Arms come complete with a pair of phased Sway Bar Arms, four shoulder bolts & flanged nuts. Rod ends and 35 spline Sway Bar Shaft are sold separately.